Defence Certified Computers
Primary Network Products (UK) Limited

R15ID3S-65EX Flat Stainless for Hazardous Location

R15ID3S-65EX Flat Stainless for Hazardous Location

Features

  • This Equipment is ATEX Zone 2 certified for Hazardous area applications and suitable for use in Class I, Division 2, Hazardous area
  • Wide power input 9-36V DC with isolation protection
  • Special IP65 connectors with cover plate
  • Designed with NEMA 4 (IP65) dust proof and water protection
  • Robust and fanless design for reliable operation
  • Fanless Cooling System and Ultra Low power consumption
  • Support Intel Atom N2600 processor
  • ELO 5W Resistive Touch ( Explosion-proof )
Download Datasheet
Flat Stainless for Hazardous Location
Order Now

LCD Panel Specification:

Panel_Size 15″
Active Display Area 304.1 (H) x 228.1 (V)
Pixel Pitch 0.297 (H) x 0.297 (V)
Panel_Display Resolution 1024×768
Panel_Contrast Ratio 700:1 (typ.)
Display Color 16.2M (6bits+FRC)
Panel_Brightness 550(typ.)
Panel_Viewing Angle -80~80 (H); -70~70 (V)
Recommend Resolution 1024×768@60Hz, 75Hz
Power Management VESA DPMS Compliant
Plug Play VESA DDC 1/2B
Touch_SensorType 5-Wire Resistive

System Specification:

FormFactor 3.5″
Processor Socket Onboard
Processor Intel® Atom Dual Core N2600 1.6GHz
Chipset Intel® NM10
Memory 1x DDR3 SO-DIMM 1333 MHz, 4GB default
BIOS AMI 16Mbit Flash
VGA Controller Integrated Graphics
LCD Support 24 bit single-channel LVDS
Ethernet Dual Broadcom BCM57780 GbE controller
Audio Realtek ALC886 HD Audio Codec
SATA 1 x SATA II
Serial 1 x RS-232,1 x RS-232/422/485(inside)*
USB 2 x USB
Watchdog Timer 256 Levels
Expansion Slots 1 x Mini PCI (internal)
Storage mSATA SSD 64GB default, Option up to 128GB
OS Windows Embedded Standard 7 Windows 7 Pro for Embedded Systems
Power Adapter DC IN 12V
Environment Environment & Dimensions
Temperature Operating : -10 deg.C to 50 deg.C
Humidity 10% to 95% non condensing
Cooling Fanless cooling concept
Shock MIL-STD-810G Method 516.6
Vibration MIL-STD-810G Method 514.6Packing:: 5 Hz ~ 500 Hz/ 2.16 Grms/ 3 Axis

I/O Connectors:

Back Panel I/O Port
  • 1 x COM
  • 1 x LAN
  • 2 x USB
  • 1 x Power input

Notes:

Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.

Top